Products >> Titanium >> Titanium pipe fittings

titanium alloy Gr7 pipe fittings supplier

titanium alloy Gr7 pipe fittings supplier

Product No.：titanium gr7 fittings
Price：perform the lastest price
Material Grade：Ti Gr7
Size：1/2
Test：RT, PT, PMI
Online Inquiry

Titanium Gr7 pipe fittings are components used to connect or join titanium Gr7 pipes in various industrial applications. Titanium Gr7 is a grade of titanium alloy known for its excellent corrosion resistance, high strength, and low density. It contains the chemical elements titanium and palladium.

Some commonly used titanium Gr7 pipe fittings include:

Titanium Gr7 pipe elbows: These fittings are used to change the direction of the pipeline by 90 or 45 degrees.

Titanium Gr7 pipe tees: Tees are used to create branches in a pipeline, allowing the flow of fluids or gases in multiple directions.

Titanium Gr7 pipe reducers: These fittings are used to connect two pipes of different diameters, allowing for a smooth transition between them.

Titanium Gr7 pipe caps: Caps are used to seal the end of a pipe, preventing the ingress of contaminants and maintaining the integrity of the system.

Titanium Gr7 pipe couplings: Couplings are used to connect two pipes together securely.

ASTM B363 WPT-Gr7 Titanium fittings
Titanium Gr7 fittings
Titanium Grade 7 (Ti-Pd) alloy fittings including 90 and 45 Degrees bending elbows, reducing and equal tees, concentric and eccentric reducers, lap-joint stub ends

Size: NPS: 1/2~48 inches

WT: SCH5S~SCH160

Standard: ANSI B16.9, ASTM B363

Certificate: EN 10204-3.1

Titanium Gr7 fittings applications: petrochemical, chemical, vessels, machinery etc

Titanium Gr7 fittings Chemical composition as per following

Chemical Composition ( WT %)
Balanced	Ti	C	O	N	H	Fe	Pd	Residual Element
	Remainder	≤	≤	≤	≤	≤	/	Each	Total
	Required	0.08	0.25	0.03	0.015	0.3	0.12-0.25	0.1	0.4
Actual	20180110-1	0.01	0.05	0.02	0.0006	0.05	0.13	0.1	0.4

Titanium Grade 7, also known as Ti-0.2Pd, is a titanium alloy that contains 0.12-0.25% palladium (Pd) as an alloying element. Here are some key points about Titanium Grade 7:

1. Composition: Titanium Grade 7 is primarily composed of titanium with the addition of palladium. It has a chemical composition of approximately 99.2% titanium and 0.12-0.25% palladium.

2. Strength and Density: Titanium Grade 7 offers good strength and mechanical properties, comparable to other commercially pure grades of titanium. It has a density of around 4.51 g/cm³, which is relatively low compared to many other metals.

3. Corrosion Resistance: Titanium Grade 7 exhibits excellent corrosion resistance, particularly in reducing environments. It is resistant to corrosion by saltwater, seawater, chlorides, and various acids. The addition of palladium further enhances its resistance to crevice corrosion and reducing acid environments.

Previous Product：ASTM B363 Titanium Gr2 90 Deg. Long Radius Elbows Next Product：titanium fittings corrosion resistance