4" Schedule 10S titanium Gr2 long raduis elbows

the outer diameter for NPS 4" is 114.3mm, schedule 10s is 3.05mm. the input material should be 3.5mm at least to assure the finished elbows wall thickness within -12.5% tolerance.

we perform dye penetrant test to the elbows, the elbows are made with seamless titanium tubes, which are pushed and extruding by dyaraulic machine. the finished scratchs shall be grinding and sand-blasted

ASTM B363 Titanium Gr2 90 Deg. LR. Elbows

Titanium Elbows with 90 Deg. Bend, 45 Deg. bend

Titanium elbows with Long radius or short radius

ASTM B363 WPT-2 Titanium Elbows

Titanium Elbows Specifications (ASME B16.9, ANSI B16.9)

NOMINAL PIPE SIZE	OUTSIDE DIAMETER	CENTER TO END
Inch.	OD （mm)	A (mm)	B (mm)	C (mm)
1/2	21.3	38	16	–
3/4	26.7	38	19	–
1	33.4	38	22	25
1-1/4	42.2	48	25	32
1-1/2	48.3	57	29	38
2	60.3	76	35	51
2-1/2	73	95	44	64
3	88.9	114	51	76
3-1/2	101.6	133	57	89
4	114.3	152	64	102
5	141.3	190	79	127
6	168.3	229	95	152
8	219.1	305	127	203
10	273.1	381	159	254
12	323.9	457	190	305
14	355.6	533	222	356
16	406.4	610	254	406
18	457.2	686	286	457
20	508	762	318	508
22	559	838	343	559
24	610	914	381	610
26	660	991	406	660
28	711	1067	438	711
30	762	1143	470	762
32	813	1219	502	813
34	864	1295	533	864
36	914	1372	565	914
38	965	1448	600	965
40	1016	1524	632	1016
42	1067	1600	660	1067
44	1118	1676	695	1118
46	1168	1753	727	1168
48	1219	1829	759	1219

90 degrees bend titanium elbows refer to pipe fittings that are made from titanium and have a 90-degree angle, allowing for changes in direction in a piping system. Titanium is a strong, lightweight, and corrosion-resistant material, making it suitable for various applications, including those involving corrosive environments or high-temperature conditions.